Glass and Ceramic Coatings
Conventional coatings adhere to materials by simple mechanical forces that will be easily broken causing peeling or delamination. This is not the case with chemical grafting since the attachment of the coating is accomplished by forming a covalent bond between the substrate and the monomers via the substrate activator. The chemical reaction that takes place provides subsurface penetration in addition to the chemical bond. As a result, much thinner coatings can be obtained while providing longer life and superior performance of the material.
Typical coating methods can be used such as dip, spray, roll. The chemical rafting formulation comes in contact with the surface of the substrate by any f these methods, The chemical grafting reaction occurs instantaneously upon contact with the material. The desired thickness and preferred application method will determine the viscosity of the formulation. Most formulations are water-based. The coatings can be air dried, however, heat (oven, IR, UV, etc.) may be used to accelerate the drying time. Most
formulations will dry in seconds to minutes.
Glass and Ceramic Adhesives
Sometimes two or more layers of various materials are laminated together to achieve desired characteristics. A generic adhesive used for all-purpose applications may fail especially when temperature changes occur. Again, these conventional adhesives hold their substrates together by mechanical means. In addition, failure of the bond will occur during temperature fluctuations due to differences in coefficients of thermal expansion. The adhesives developed by APS use difunctional monomers and attach themselves to the substrates by a helical bond. This helix allows the resultant and to move with the differences in the expansion and contraction rates of the glass. Even substrates that are typically difficult to bond are activated and attached by this means.
Blown, fiber, sheet Scratch, abrasion resistance, adhesion of water-based inks, decorative finishes, shatter resistance, UV barrier, water repellent, etc.